Technical Information For Phoenix No. 580, 581, & 582 Non-Toxic Anti-Wear Lubricants.
Phoenix non-toxic anti-wear lubricants are versatile lubricating oils that can be used as hydraulic fluids, compressor lubricants, general purpose lubricating oils and as gear lubricants where low viscosity oils are required. All grades contain an FDA approved microbicide that is reported by its manufacturer to be effacious relative to the strains of bacteria, yeasts and molds listed below.
Moreover all grades are authorized H-1 by the Food Safety and Inspection Service of the United States Department of Agriculture. This H-1 designation identifies Phoenix non-toxic anti-wear lubricants as products that are permitted for use in food plants where incidental contact with the food or beverage can occur.
Phoenix non-toxic anti-wear lubricants are versatile lubricating oils that can be used as hydraulic fluids, compressor lubricants, general purpose lubricating oils and as gear lubricants where low viscosity oils are required. All grades contain an FDA approved microbicide that is reported by its manufacturer to be effacious relative to the strains of bacteria, yeasts and molds listed below.
Moreover all grades are authorized H-1 by the Food Safety and Inspection Service of the United States Department of Agriculture. This H-1 designation identifies Phoenix non-toxic anti-wear lubricants as products that are permitted for use in food plants where incidental contact with the food or beverage can occur.
| Partial List Of Microorganisms | ||
|---|---|---|
| 1 - Listeria Monocytogenes | 2 - Salmonella Typhosa | 3 - Staphylococcus Aureus |
| 4 - Escherichia Coli | 5 - Bacillus Subtilis | 6 - Proteus Vulgaris |
| 1 - Pseudomonas Aeruginosa | 8 - Pseudomanosa Fluorescens | 9 - Saccharomyces Ceriersial |
| 10 - Rhizopus Nigricans | ||
| Typical Specifications | |||
|---|---|---|---|
| Product No. | 580 | 581 | 582 |
| Grade | 10 | 20 | 30 |
| Viscosity ASTM 0-2161 | |||
| Sus @ 100° F | 210.0 | 330.0 | 512.0 |
| Sus @ 210° F | 46.2 | 54.0 | 63.0 |
| Viscosity Index, ASTM D-2210 | 105 | 103 | 102 |
| Load Carrying Ability 4-Ball Wear Test, ASTM D-4112 40 KG Load Scar, Diam, Mm | 0.48 | 0.48 | 0.48 |
| Pour Point °F, ASTM D-97 | S | 10 | 10 |
| Turbine Oil Rust Test, ASTM D-665 | |||
| Procedure A | No Rust | ||
| Procedure B | No Rust | ||
| Gravity, API | 32.3 | 31.1 | 29.8 |